A schematic representation of the electrical connections within a system that uses a powered target for tracking or data acquisition illustrates how power and signals are routed to and from the target. This visual guide often includes symbols for various components, such as sensors, power supplies, and data acquisition units, and indicates the specific wiring paths between them. An example might be a system using a radar reflector equipped with sensors to measure environmental conditions. The schematic would detail how power reaches the reflector and how the sensor data is transmitted back to the monitoring station.
Such schematics are essential for troubleshooting, system maintenance, and ensuring proper functionality. Understanding the flow of power and data allows technicians to diagnose faults, replace components correctly, and ensure accurate data capture. Historically, these diagrams have been crucial for complex systems, evolving from simple hand-drawn blueprints to sophisticated computer-aided designs, reflecting advancements in both system complexity and diagramming techniques. This evolution has significantly improved system reliability and maintainability across diverse fields like aerospace, defense, and environmental monitoring.
The following sections delve into the core components commonly found in these systems, explore various applications across different industries, and address best practices for design and implementation. Additionally, safety considerations and future trends in powered target system design will be examined.
1. Schematic Representation
Schematic representation forms the foundation of an active target wiring diagram. It provides a visual abstraction of the system’s electrical connections, replacing physical components with standardized symbols. This symbolic language allows for a simplified yet comprehensive understanding of complex wiring arrangements within the active target system. Without a schematic, tracing wires and understanding signal flow would be significantly more challenging, potentially leading to misinterpretations and errors during installation, maintenance, or troubleshooting. A well-designed schematic representation facilitates efficient analysis and manipulation of the system’s electrical architecture. For example, in a radar testing environment, the schematic clearly depicts the connections between the radar transmitter, the active target’s transponder, and the receiving antenna, enabling technicians to quickly identify potential signal path disruptions.
The importance of a clear schematic representation becomes particularly evident during troubleshooting. When a fault occurs, the schematic serves as a roadmap, guiding technicians through the system’s wiring and aiding in the identification of the faulty component or connection. Imagine a scenario where the active target fails to respond to the radar signal. The schematic allows technicians to systematically check the power supply to the target, the integrity of the signal lines, and the functionality of the transponder, significantly reducing diagnostic time. Furthermore, schematic representations are crucial for system modifications and upgrades. They allow engineers to assess the impact of changes on the existing wiring and ensure compatibility with new components, minimizing the risk of integration issues. For example, adding a new sensor to the active target requires careful consideration of its power requirements and data connections, all of which can be planned and verified using the schematic.
In conclusion, the schematic representation is not merely a visual aid but a critical component of an active target wiring diagram. Its ability to simplify complex wiring arrangements, facilitate troubleshooting, and support system modifications makes it indispensable for the effective operation and maintenance of these systems. Challenges remain in keeping schematics up-to-date with system modifications and ensuring consistent interpretation across different teams. However, the ongoing development of sophisticated diagramming software and standardization efforts are continually improving the clarity and utility of schematic representations, ensuring their continued relevance in increasingly complex active target systems.
2. Electrical Connections
Electrical connections form the core of an active target wiring diagram. These connections, represented as lines within the diagram, dictate the pathways for power and data transmission throughout the system. The precision and integrity of these connections directly influence the active target’s performance and reliability. A faulty connection can lead to malfunctions, data corruption, or complete system failure. Consider an active target used in a missile guidance system: a compromised connection could disrupt communication, rendering the target ineffective and jeopardizing the mission. Therefore, understanding the layout and specifications of each electrical connection is paramount for proper system operation.
The active target wiring diagram provides a crucial visual representation of these critical electrical connections. It details the specific routes that power and data signals take, identifying the components they connect. This information allows technicians to diagnose problems, perform maintenance, and ensure the system’s continued functionality. For example, if the active target fails to transmit data, the diagram allows technicians to trace the signal path, identify potential connection points of failure, and systematically test each segment. This structured approach simplifies troubleshooting and minimizes downtime, highlighting the diagram’s practical value. In high-stakes scenarios like military applications or scientific research, the ability to quickly diagnose and rectify connection issues is crucial.
In summary, the electrical connections within an active target system are its lifeblood, and the wiring diagram serves as the essential map. Accurate representation of these connections within the diagram is crucial for system comprehension, maintenance, and troubleshooting. Challenges arise from the increasing complexity of modern active target systems, necessitating advanced diagramming techniques and meticulous documentation. However, the fundamental principle remains: a clear understanding of the electrical connections, as depicted in the wiring diagram, is essential for ensuring the active target’s reliability and effectiveness, whatever the application.
3. Powered Target
The concept of a “powered target” is central to understanding an active target wiring diagram. A powered target, unlike a passive reflector, incorporates active components such as transponders, sensors, or emitters, requiring electrical power for operation. This power requirement necessitates a dedicated wiring scheme, detailed within the active target wiring diagram. The diagram becomes the blueprint for supplying power to these active components, ensuring their correct functionality and enabling the target to perform its intended role. For instance, in a radar testing scenario, a powered target might include a transponder that amplifies and returns the radar signal. The wiring diagram would specify the power connections required to operate this transponder, ensuring it can effectively respond to incoming radar waves. Without a clear understanding of the powered target’s power needs and the corresponding wiring, the entire system’s effectiveness is compromised.
The importance of the powered target within the broader system context cannot be overstated. It often serves as the focal point for data acquisition or system interaction. Consider a target drone used for military training: its onboard systems, powered through connections detailed in the wiring diagram, allow it to mimic enemy aircraft, providing realistic training scenarios. The diagram, therefore, facilitates not only the target’s basic operation but also its complex interactions within the training environment. In scientific applications, powered targets equipped with sensors can collect data from remote or hazardous locations. The wiring diagram ensures these sensors receive consistent power, enabling reliable data collection crucial for research purposes. Understanding the power distribution within the target is essential for interpreting the data collected and ensuring the integrity of the experiment.
In conclusion, the powered target represents a critical component within any system employing an active target wiring diagram. The diagram itself becomes a roadmap for powering these active elements, directly influencing the target’s functionality and its ability to fulfill its designated purpose. Challenges in designing and maintaining these systems arise from the increasing complexity of powered targets and the need for robust, adaptable wiring schemes. However, the essential principle remains: a thorough understanding of the powered target’s power requirements, as articulated within the wiring diagram, is fundamental for ensuring system reliability and achieving desired outcomes, whether in defense, research, or other applications. Further exploration of specific applications and their respective wiring diagram considerations will provide a deeper understanding of this crucial interdependency.
4. Signal Flow
Signal flow within an active target system is inextricably linked to its wiring diagram. The diagram serves as a visual representation of the pathways these signals traverse, connecting various components such as sensors, transponders, and processing units. Understanding signal flow is crucial for comprehending system functionality, diagnosing issues, and implementing modifications. The wiring diagram provides the roadmap for tracing these pathways, enabling technicians and engineers to analyze how data is acquired, processed, and transmitted. Consider a radar system: the diagram would illustrate the signal’s journey from the radar transmitter to the active target’s transponder, then back to the receiver. This clear depiction of signal flow allows for precise analysis of potential points of failure or areas for optimization. For instance, signal latency or attenuation can be investigated by examining the length and characteristics of the wiring paths depicted in the diagram. This understanding allows for informed decisions regarding cable selection or component placement to mitigate such issues.
The practical significance of understanding signal flow within an active target system is substantial. In complex systems, multiple signals with varying characteristics may be present. The wiring diagram differentiates these signals, indicating their respective purposes and destinations. This clarity is essential for troubleshooting, enabling targeted analysis of specific signal chains without unnecessary disruption to other system functions. Imagine an active target equipped with multiple sensors: the diagram would distinguish the data streams from each sensor, facilitating independent analysis and troubleshooting. This granular level of understanding is essential for maintaining system integrity and ensuring data accuracy. Furthermore, the diagram aids in system modification and expansion. Adding new components requires careful consideration of signal flow integration to avoid interference or data corruption. The diagram provides a clear framework for incorporating these changes while maintaining the system’s overall performance and stability. For instance, integrating a new sensor requires an understanding of its signal characteristics and how they interact with existing signal paths, as detailed in the diagram.
In conclusion, the relationship between signal flow and the active target wiring diagram is fundamental. The diagram serves as the definitive guide to the intricate pathways signals follow within the system. This understanding is essential for comprehensive system analysis, efficient troubleshooting, and effective integration of modifications. Challenges arise from the increasing complexity of modern active target systems, necessitating meticulous diagram maintenance and advanced visualization techniques. However, the core principle remains: a clear grasp of signal flow, as depicted in the wiring diagram, is indispensable for ensuring system reliability and achieving desired operational outcomes. Further exploration of specific signal processing techniques and their diagrammatic representation will provide a deeper understanding of this crucial interplay.
5. Component Symbols
Component symbols are integral to the clarity and utility of an active target wiring diagram. These symbols, standardized representations of various electrical and electronic components, provide a concise visual language for depicting complex system architectures. Without these standardized symbols, diagrams would become unwieldy and difficult to interpret, hindering effective communication among engineers and technicians. The use of symbols allows for a simplified representation that retains essential information regarding component function and interconnection. For example, a resistor is universally represented by a zigzag line, while a capacitor is depicted by two parallel lines. This standardized representation ensures consistent interpretation across different teams and projects, reducing the risk of miscommunication and errors. Consider a complex active target system incorporating numerous sensors, processors, and communication modules. The use of component symbols allows each of these elements to be clearly identified within the wiring diagram, facilitating efficient analysis and troubleshooting. Without such symbols, the diagram would become a confusing maze of lines and labels, obscuring critical information about system functionality.
The practical significance of component symbols extends beyond mere simplification. They enable rapid comprehension of system functionality and facilitate efficient troubleshooting. By quickly identifying components within the diagram, technicians can isolate faulty elements, trace signal paths, and implement corrective measures. For instance, if a specific sensor within an active target malfunctions, the corresponding symbol on the wiring diagram allows technicians to quickly locate its physical counterpart within the system and perform necessary repairs or replacements. Furthermore, the use of standardized symbols aids in system design and modification. Engineers can readily visualize the system architecture and assess the impact of changes, ensuring compatibility and minimizing integration issues. For example, adding a new communication module requires understanding its interface with existing components, readily discernible through their respective symbols on the wiring diagram. This streamlined approach fosters efficient system development and reduces the risk of errors.
In conclusion, component symbols are indispensable elements of an active target wiring diagram. Their standardized representation of various components allows for concise depiction of complex system architectures, facilitating efficient communication, troubleshooting, and system modification. Challenges arise from the ongoing evolution of electronic components and the need to maintain consistent standardization across the industry. However, the fundamental principle remains: the effective use of component symbols is paramount for ensuring the clarity, utility, and overall effectiveness of active target wiring diagrams. Further exploration of specific symbol sets and their application in different contexts will enhance comprehension of their critical role in these essential diagrams.
6. Wiring Paths
Wiring paths constitute a critical element within an active target wiring diagram. These paths, represented as lines on the diagram, delineate the physical routes of electrical connections between components. Understanding these pathways is essential for system comprehension, troubleshooting, and modification. A clear depiction of wiring paths allows technicians and engineers to trace signal flow, identify potential interference points, and ensure system integrity. This section explores the multifaceted nature of wiring paths and their impact on active target system functionality.
-
Physical Routing and Signal Integrity
Wiring paths dictate the physical routes of conductors within the active target system. These routes significantly influence signal integrity, particularly in high-frequency or sensitive applications. Improper routing can lead to signal degradation through interference, crosstalk, or attenuation. For example, placing a high-speed data line adjacent to a power line can introduce noise and corrupt the data signal. Active target wiring diagrams address this by specifying optimal routing strategies, including shielding, cable separation, and grounding techniques, to maintain signal quality and ensure reliable system operation. Detailed routing information within the diagram is crucial for minimizing signal degradation and optimizing system performance. In radar systems, where signal clarity is paramount, meticulous wiring path planning is essential to prevent spurious reflections and ensure accurate target tracking.
-
Connectivity and Component Interaction
Wiring paths define the interconnections between various components within the active target system, establishing the network through which power and data flow. Understanding these connections is fundamental for troubleshooting. If a component malfunctions, the wiring diagram facilitates tracing its connections to identify potential cascading failures or points of isolation. For instance, if a sensor fails to transmit data, the wiring diagram allows technicians to trace its connection to the data acquisition unit, verifying cable integrity and pin assignments. This structured approach simplifies fault isolation and expedites repairs. In complex systems with multiple interconnected components, clear wiring path documentation is crucial for efficient maintenance and minimizing downtime.
-
System Maintenance and Modification
Wiring paths documented in the diagram are invaluable during system maintenance and modification. They provide a roadmap for technicians navigating the system’s physical layout, facilitating tasks such as component replacement or upgrades. Clear wiring diagrams minimize the risk of accidental disconnections or incorrect wiring during maintenance procedures. For example, replacing a faulty transponder in an active target requires precise knowledge of its wiring connections to ensure proper integration with the existing system. Similarly, system modifications, such as adding new sensors, necessitate careful planning of wiring paths to avoid interference and maintain signal integrity. The diagram serves as a blueprint for these changes, ensuring compatibility and minimizing disruption to existing functionalities.
-
Safety and Regulatory Compliance
Wiring paths play a crucial role in ensuring system safety and compliance with relevant regulations. Properly documented wiring diagrams facilitate adherence to safety standards by specifying cable types, grounding procedures, and shielding requirements. For example, high-voltage lines must be clearly identified and routed to prevent accidental contact, and shielding may be required to minimize electromagnetic emissions. Active target wiring diagrams often incorporate color-coding or other visual cues to highlight critical safety considerations, ensuring compliance with industry best practices and regulatory mandates. This attention to safety aspects is particularly important in applications like aerospace or defense, where system reliability and personnel safety are paramount.
In conclusion, wiring paths within an active target wiring diagram represent more than mere lines on a schematic; they are the physical embodiment of the system’s interconnectedness and functionality. Careful consideration of wiring paths is crucial for ensuring signal integrity, facilitating troubleshooting, supporting system maintenance, and adhering to safety regulations. The complexity of modern active target systems necessitates meticulous documentation and management of wiring paths within the diagram, underscoring their importance in achieving reliable and effective system operation.
7. Troubleshooting Aid
An active target wiring diagram serves as an indispensable troubleshooting aid for systems employing powered targets. It provides a systematic approach to diagnosing and resolving malfunctions, reducing downtime and minimizing operational disruptions. The diagram’s visual representation of the system’s electrical architecture enables technicians to trace signal paths, isolate faulty components, and verify connections, streamlining the troubleshooting process. Cause-and-effect relationships within the system become readily apparent, allowing for targeted interventions rather than trial-and-error approaches. For instance, if an active target fails to respond, the diagram allows technicians to systematically check power supply lines, communication interfaces, and internal circuitry, leading to efficient identification of the root cause. Consider a scenario where a radar system using an active target experiences intermittent signal loss. The wiring diagram allows technicians to trace the signal path from the transmitter to the target’s transponder and back to the receiver, pinpointing potential points of failure such as loose connections, damaged cables, or faulty components within the signal chain.
The importance of the wiring diagram as a troubleshooting tool is further amplified in complex systems with numerous interconnected components. Without a clear schematic representation, isolating faults becomes significantly more challenging, potentially leading to prolonged downtime and increased costs. The diagram facilitates a structured approach to troubleshooting, minimizing guesswork and promoting efficient problem resolution. Practical applications abound in various fields. In aerospace, a wiring diagram can be crucial for diagnosing malfunctions in an aircraft’s radar system, ensuring flight safety. In environmental monitoring, it aids in troubleshooting sensor networks deployed in remote locations, maximizing data collection reliability. In industrial automation, it facilitates rapid fault identification in complex control systems, minimizing production disruptions.
In summary, the active target wiring diagram is an essential troubleshooting aid, offering a systematic approach to fault diagnosis and resolution. Its value lies in providing a visual roadmap of the system’s electrical architecture, enabling efficient identification of root causes and targeted interventions. While challenges remain in maintaining up-to-date diagrams for complex evolving systems, their utility in minimizing downtime and ensuring operational efficiency remains paramount. The increasing complexity of modern active target systems underscores the continued and growing importance of detailed, accurate wiring diagrams as essential troubleshooting tools.
8. System Maintenance
System maintenance for setups utilizing active targets relies heavily on accurate and up-to-date wiring diagrams. These diagrams provide crucial information for preventative maintenance, troubleshooting, and system upgrades, ensuring continued operational effectiveness and minimizing downtime. Understanding the interplay between system maintenance procedures and the information presented within the wiring diagram is essential for technicians and engineers responsible for these systems. This section explores several key facets of this relationship.
-
Preventative Maintenance
Preventative maintenance procedures, designed to mitigate potential issues before they escalate, depend on the active target wiring diagram for guidance. The diagram allows technicians to identify critical components and connections that require regular inspection, cleaning, or replacement. For example, connectors exposed to harsh environments might necessitate periodic cleaning and application of protective lubricants. The wiring diagram pinpoints the location of these connectors and specifies appropriate maintenance procedures, preventing corrosion or signal degradation. Regularly scheduled maintenance based on the wiring diagram’s guidance extends system lifespan and minimizes unexpected failures. In radar systems, preventative maintenance of waveguides and connectors, as indicated in the diagram, ensures optimal signal transmission and reception.
-
Troubleshooting and Repair
When system malfunctions occur, the active target wiring diagram becomes the primary tool for troubleshooting and repair. It provides a visual roadmap of the system’s electrical architecture, enabling technicians to trace signal paths, isolate faulty components, and verify connections. For example, if a sensor fails, the wiring diagram guides technicians through the process of checking power supply lines, data connections, and sensor integrity, expediting the repair process. In complex systems, the diagram simplifies fault isolation, preventing unnecessary component replacements and minimizing downtime. Consider a robotic system utilizing an active target for positioning: a malfunctioning motor can be quickly diagnosed and repaired by referencing the wiring diagram, minimizing disruption to the automated process. This highlights the diagram’s critical role in rapid and accurate troubleshooting.
-
System Upgrades and Modifications
System upgrades and modifications necessitate careful consideration of the existing wiring infrastructure. The active target wiring diagram provides a crucial reference for integrating new components or modifying existing connections. It ensures compatibility between new and legacy systems, minimizing integration issues and preventing unintended consequences. For example, adding a new sensor requires understanding its power requirements and data connections, all of which are detailed in the diagram. This information guides technicians in making the necessary wiring modifications while maintaining system integrity. In a surveillance system, upgrading cameras or adding new monitoring stations requires careful integration with the existing wiring, as specified in the diagram, to ensure seamless operation and prevent signal conflicts. The diagram thus plays a crucial role in managing system evolution and ensuring compatibility.
-
Documentation and Training
The active target wiring diagram serves as essential documentation for system maintenance procedures. It provides a standardized reference for training new personnel, ensuring consistency and reducing the risk of errors. Detailed diagrams depicting component locations, wiring paths, and connector pinouts enable technicians to quickly familiarize themselves with the system, facilitating efficient maintenance and troubleshooting. This documentation is crucial for knowledge transfer and maintaining long-term system supportability. In complex military systems, detailed wiring diagrams are integral to training maintenance personnel, ensuring they can effectively diagnose and repair complex equipment in the field. This comprehensive documentation promotes system reliability and reduces reliance on specialized expertise, ultimately enhancing operational readiness. This reliance on precise diagrams ensures consistent maintenance practices and efficient knowledge transfer.
In conclusion, system maintenance for active target systems is inextricably linked to the corresponding wiring diagram. From preventative maintenance to troubleshooting and system upgrades, the diagram provides crucial information for ensuring operational effectiveness and minimizing downtime. As systems become increasingly complex, the role of the active target wiring diagram in system maintenance becomes even more critical, underscoring the need for accurate, up-to-date documentation and its effective utilization by maintenance personnel. This interdependency emphasizes the importance of treating the wiring diagram not as a static document but as a dynamic tool integral to the ongoing health and performance of the active target system.
Frequently Asked Questions
This section addresses common inquiries regarding active target wiring diagrams, providing concise and informative responses to clarify potential ambiguities and enhance overall understanding.
Question 1: What distinguishes an active target wiring diagram from a passive target diagram?
Active target diagrams incorporate power and signal lines for active components like transponders or sensors, whereas passive target diagrams focus solely on structural and material properties.
Question 2: How do component symbols contribute to diagram clarity?
Standardized component symbols provide a concise visual language, simplifying complex representations and promoting consistent interpretation across different teams and disciplines.
Question 3: What role does signal flow analysis play in troubleshooting?
Signal flow analysis, guided by the wiring diagram, enables tracing signal paths, identifying potential points of failure, and isolating faulty components within the active target system.
Question 4: Why is accurate wiring path representation crucial?
Accurate wiring paths ensure signal integrity by minimizing interference, crosstalk, and attenuation, contributing to reliable system operation and data accuracy. Furthermore, they simplify maintenance and modifications.
Question 5: How does the wiring diagram support system maintenance procedures?
The diagram guides preventative maintenance by identifying critical components and connections. It also aids troubleshooting by facilitating component isolation and verification of wiring integrity. Furthermore, it is crucial for system upgrades and modifications.
Question 6: What challenges are associated with maintaining accurate wiring diagrams for evolving systems?
Maintaining diagram accuracy requires meticulous documentation practices and version control, especially as systems undergo modifications or upgrades. Challenges include ensuring consistency across different versions and reflecting hardware changes promptly.
Understanding these frequently asked questions enhances the ability to interpret and utilize active target wiring diagrams effectively, promoting successful system implementation, maintenance, and troubleshooting.
The next section delves into specific case studies, illustrating practical applications of active target wiring diagrams in various fields.
Tips for Working with Active Target Wiring Diagrams
Careful attention to detail and adherence to best practices are essential when working with active target wiring diagrams. The following tips provide guidance for ensuring accurate interpretation, efficient utilization, and effective system maintenance.
Tip 1: Prioritize Diagram Clarity and Accuracy. Ensure the diagram is legible and free from ambiguities. Use clear, standardized symbols and consistent labeling conventions. Accuracy is paramount; any discrepancies between the diagram and the physical system can lead to significant errors during troubleshooting or maintenance.
Tip 2: Understand Signal Flow. Trace signal paths within the diagram to comprehend system functionality and identify potential points of failure. This understanding is crucial for effective troubleshooting and system analysis.
Tip 3: Verify Component Compatibility. Before integrating new components, consult the wiring diagram to ensure compatibility with the existing system. Verify voltage levels, signal characteristics, and connector types to prevent damage or malfunction.
Tip 4: Employ Proper Grounding Techniques. Adequate grounding is essential for system stability and safety. The wiring diagram should specify grounding points and procedures to minimize noise and prevent electrical hazards. For example, ensure all shields are properly grounded to prevent interference.
Tip 5: Document Modifications Meticulously. Any changes to the system wiring must be reflected in the diagram. Maintain accurate and up-to-date documentation to prevent confusion and ensure the diagram remains a reliable reference.
Tip 6: Utilize Cable Management Best Practices. Proper cable routing and bundling prevent interference, simplify troubleshooting, and contribute to a well-organized system. The wiring diagram should guide cable management practices, specifying cable types, shielding requirements, and routing pathways. Example: bundle signal cables separately from power cables to minimize noise.
Tip 7: Consult Relevant Standards and Regulations. Adhere to industry standards and regulatory requirements when designing and implementing active target wiring schemes. The diagram should reflect these standards, ensuring system safety and compliance. Example: use appropriately rated cables for high-voltage applications.
Adhering to these tips ensures the active target wiring diagram remains a valuable tool throughout the system’s lifecycle, contributing to efficient operation, effective maintenance, and enhanced safety. These practices promote system reliability and minimize the risk of errors arising from outdated or inaccurate documentation.
The following conclusion summarizes the key takeaways and emphasizes the importance of active target wiring diagrams in modern systems.
Conclusion
Active target wiring diagrams provide a crucial foundation for the design, implementation, and maintenance of systems employing powered targets. This exploration has highlighted the significance of accurate schematic representations, clear depiction of electrical connections and wiring paths, and the importance of understanding signal flow. Component symbols, as a standardized visual language, contribute significantly to diagram clarity and facilitate effective communication among technical personnel. The role of the active target wiring diagram in troubleshooting and system maintenance has been underscored, emphasizing its utility in minimizing downtime and ensuring operational efficiency. Furthermore, adherence to best practices, including meticulous documentation and adherence to relevant standards, ensures the diagram remains a valuable resource throughout the system’s lifecycle.
As systems incorporating active targets continue to grow in complexity, the importance of well-designed and meticulously maintained wiring diagrams cannot be overstated. These diagrams represent more than mere technical schematics; they are essential tools that empower technicians and engineers to understand, operate, and maintain these sophisticated systems effectively. A commitment to clear, accurate, and accessible wiring diagrams is a commitment to system reliability, safety, and ultimately, operational success. Further research and development in diagramming techniques, coupled with continued emphasis on standardization and best practices, will further enhance the utility and effectiveness of active target wiring diagrams in the future.